Ｖａｒｉａｂｌｅ ｈｉｇｈ ｓｐｅｅｄ ｐｏｌｉｓｈｉｎｇ ｍａｃｈｉｎｅ
| Number of spindle | 4 spindles | |
| Lower spindle speed | 70 ～ 280 ｒ.ｐ.ｍ. variable speed | |
| Upper spindle oscillating frequency | 50 ～ 200 per minutes variable speed | |
| Upper spindle oscillating stroke | 0 ～ 150 ㎜ | |
| Distance between spindles | 380 ㎜ | |
| Timer | multi timer multistep compression | |
| Moter | 200V 400Ｗ 8P 3Ø 4pcs. | |
| Coolant pump | 200V 180Ｗ 2P 3Ø 1pc. | |
| Abrasive liquid tank | Ø＝310㎜ 1pc. | |
| Dimensions | W 1,860㎜ D 950㎜ H 800㎜ | |
| Weight | 900kg | |
diameters.
2) Upper and lower spindles can be selected individual speeds as each spindle is
driven be each motor.
3) Functions (polishing time and start button) are controlled by each 2 spindles.
Individual control for each spindle is availabel on requeat. Spindle can be
stopped by each.
4) Upper spindle is moved following the locus of approximate ellipse with
warrantable mechanism and tommy-bar can be directed to spherical center on
concave or convex surface.
5) Work pressure is controlled by air. tommy-bar is moved to up and down by foot
pedal attached on each apindle. Polishing timer is set by timer.
6) Coolant tank is made of stainless steel and coolant pump is applied rust
proof and seal treatment and fitted blades for agitating . Uniformity abrasive
liquid can be fad with preventing abrasive precipitation.
